Niaar supplies Flame Detectors UAE from Honeywell, Autrol, FGD Fire & Gas Detection Tech, and Consilium — UV flame detector Dubai, IR3 flame sensor, SIL rated flame detectors, and offshore flame detection for UAE and GCC projects.
Niaar supplies Flame Detectors UAE from leading manufacturers including Honeywell, Autrol, FGD Fire & Gas Detection Tech, and Consilium. Flame Detectors UAE are optical sensors that detect the electromagnetic radiation emitted by fires. They are used in high-hazard areas where fire growth would be too rapid for heat or smoke detectors to provide adequate warning.
Niaar provides full procurement support for Flame Detectors UAE and all industrial fire detection systems across the UAE and GCC.
A UV flame detector Dubai detects the ultraviolet radiation emitted by fires and explosions. First, UV flame detectors Dubai respond very rapidly to open flame events. They are commonly used in offshore platforms, aircraft hangars, and military installations. Second, UV flame detectors are sensitive to a wide range of hydrocarbon and non-hydrocarbon fires.
This includes hydrogen fires that produce no visible or IR radiation. Third, UV flame detector Dubai products from Honeywell and FGD Fire & Gas Detection Tech are available in ATEX Zone 1 certified configurations.
Furthermore, UV flame detectors Dubai must be positioned to provide an unobstructed field of view of the protected hazard. Niaar provides cone-of-vision mapping to confirm coverage. Therefore, Flame Detectors UAE in UV configuration from Niaar provide rapid and reliable fire detection for UAE high-hazard industrial applications.
An IR3 flame sensor uses three infrared wavelength bands to detect hydrocarbon fires while rejecting false alarms from hot process equipment and solar radiation. First, the IR3 flame sensor compares signals at multiple infrared wavelengths. This spectral analysis allows the detector to distinguish fire radiation from background sources.
Second, IR3 flame sensors provide excellent immunity to false alarms in industrial environments with hot surfaces, steam, and sunlight. Third, IR3 flame sensors from Honeywell are available in SIL rated flame detector versions for safety-instrumented system applications.
Furthermore, IR3 flame sensors are the preferred hydrocarbon flame detector technology in UAE oil and gas processing facilities. Therefore, Flame Detectors UAE in IR3 configuration from Niaar cover every hydrocarbon fire detection requirement at UAE industrial sites.
Explosion-proof flame sensors are certified for installation in Zone 1 and Zone 2 classified areas at UAE oil and gas, petrochemical. Offshore facilities. First, explosion-proof flame sensors from Honeywell, Autrol, and FGD carry ATEX Zone 1 and IECEx certification.
Second, explosion-proof flame sensors use Ex d flameproof or Ex ia intrinsically safe enclosure designs. Third, all flame detectors for UAE hazardous area installation undergo third-party certification testing to confirm performance under the specified environmental conditions.
Furthermore, explosion-proof flame sensors include field-adjustable sensitivity settings. These allow the detection range and alarm threshold to be optimised for each specific installation geometry. Therefore, Flame Detectors UAE in explosion-proof configuration from Niaar are correctly specified for UAE hazardous area requirements.
A SIL rated flame detector meets the requirements of IEC 61508 and IEC 61511 for use in safety-instrumented systems. First, SIL rated flame detectors are specified for fire and gas safety systems where functional safety integrity levels are required by UAE process safety management programmes.
Second, SIL 2 rated flame detectors from Honeywell provide the probability of failure on demand (PFD) required for SIL 2 safety functions. Third, SIL rated flame detectors are supplied with functional safety data packages. These include PFD calculations, hardware fault tolerance confirmation, and systematic capability assessment.
Furthermore, SIL rated flame detectors from FGD Fire & Gas Detection Tech and Autrol support integration into safety PLCs and fire and gas control systems. Therefore, Flame Detectors UAE in SIL rated configuration from Niaar meet all UAE process safety and functional safety requirements.
Offshore flame detection applications require detectors certified for marine and offshore environments. First, offshore flame detectors are tested to NORSOK Z-015 and IP66/IP67 ingress protection standards. Second, marine type approval from Lloyd's Register, DNV, or Bureau Veritas is required for flame detectors installed on UAE-flagged vessels and offshore structures.
Third, offshore flame detection systems from Consilium and Honeywell are designed to survive high humidity, salt spray. Vibration in the offshore UAE environment.
Furthermore, offshore flame detection systems typically integrate with a dedicated fire and gas control panel. This panel manages all platform fire detection and suppression systems.
Niaar manages Flame Detectors UAE procurement from hazard assessment through detector selection, ATEX and SIL compliance review, and delivery. As a petrochemical fire safety equipment supplier, Niaar works with Honeywell, Autrol, FGD Fire & Gas Detection Tech. Consilium for all UAE and GCC flame detection projects.
Submit an RFQ via Niaar.net for these detectors, UV flame detector Dubai, IR3 flame sensor, SIL rated flame detector. Offshore flame detection systems across UAE and GCC projects.
Our Flame Detectors (UV/IR/IR3) feature advanced technical specifications engineered for demanding industrial fire detection applications across diverse operational environments.
| Specification | Details |
|---|---|
| Detection Technologies | UV (ultraviolet), IR (single infrared), Dual IR/UV, Triple IR (IR3) spectral analysis |
| Detection Range | 10 to 65 meters depending on detector model and flame size |
| Response Time | Less than 3 seconds for hydrocarbon fires; IR3 models: <5 seconds |
| Field of View | 90° to 120° cone of vision (model dependent) |
| Spectral Response | UV: 185-260nm; IR: 4.3-4.4μm; IR3: multiple wavelength analysis |
| Operating Temperature | -40°C to +75°C (-40°F to +167°F) |
| Hazardous Area Rating | ATEX/IECEx Zone 1 & 2; Class I Division 1 & 2; IP66/IP67 ingress protection |
| Output Signals | 4-20mA analog, relay contacts, HART, Modbus RTU/TCP, Foundation Fieldbus |
| Power Supply | 18-32 VDC typical; loop-powered options available |
| Self-Diagnostics | Continuous optical path monitoring, fault detection, automatic calibration verification |
| Enclosure Materials | 316 stainless steel, corrosion-resistant aluminum alloy with protective coatings |
| SIL Rating | SIL 2 or SIL 3 certified models available for safety-instrumented systems |
Niaar's flame detection systems comply with international safety and performance standards:
